top of page

  Journal Publications (*corresponding)

  1. C. Jeong*, “Control of Four Types of Aluminum Alloys Having Harsh Oil Repellency to Prevent Extreme Contamination and Corrosion”, In preparation.

  2. C. Jeong*, “The Research Progress on the Fabrication with Diverse Anodic Aluminum Oxide Structures”, In preparation.

  3. S. Lee, J. Kim and C. Jeong*, “Observation of Dynamic Behavior of Water Droplets on Hydrophilic Aluminum Surface”, In preparation.

  4. Y. Zhai, Y. Choi, S. Choi, KC. Jeong*, C. Jeong*, “Influence of Surface Topography and Hydrophilicity on Bacterial Adhesion and Antimicrobial Efficacy of Titanium Dioxide Coatings”, In preparation.

  5. S.-H. Kim, Y. Choi, and C. Jeong*, “A Study on the Prediction Model of the Color Change of Titanium Surface, In preparation.

  6. J. Kim, Y. Choi and C. Jeong*, “Optimization of the Barrier Oxide Layer to Enhance Long-term Corrosion Resistance of SUS 316L Stainless Steel in 3.5 wt% NaCl Solution”, Submitted.

  7. Y. Choi and C. Jeong*, “Investigating the Influence of Pore-widening Time Control in Electrochemical Anodization for the Formation of Hybrid Titanium Nanostructures with Enhanced Superhydrophobicity for Improved Corrosion Resistance Efficiency”, Electrochimica Acta 492, 144380 (2024).  https://doi.org/10.1016/j.electacta.2024.144380

  8. J. Kim and C. Jeong*, “Research on Variation in Nanopore Parameters and Surface Characteristics of Anodic Aluminum Oxide (AAO) Films with Time-controlled Anodization Processes”, Journal of Materials Science 59, 10556-10571 (2024). https://doi.org/10.1007/s10853-024-09806-y 

  9. Y. Choi and C. Jeong*, “Nano-engineering of Hybrid Titanium Oxide Structure (TiO2) using Pore-widening Concentration for Enhanced Superhydrophilicity”, Corrosion Science and Technology 23(1), 41-53 (2024). (Cover Page)

  10. J. Kim and C. Jeong*, “Investigation of Functional 6061 Aluminum Alloy Oxide Film with Anodization Voltage and its Corrosion Resistance”, Corrosion Science and Technology 22(6), 300-407 (2023). (Cover Page)

  11. Y. Choi and C. Jeong*, “Influence of Electrolyte on the Shape and Characteristics of TiO2 during Anodic Oxidation of Titanium”, Corrosion Science and Technology 22 (3), 193-200 (2023).

  12. J. Yun, Y. Kim and C. Jeong*, “A Study on the Manufacture of Flexible and Transparent Wood Composite Panels Filled with Polymer in a Porous Structure”, Polymer(Korea) 47(2), 206-211 (2023). 

  13. C. Jeong, J. Jung, K. Sheppard, C.-H. Choi, “Control of the Nanopore Architecture of Anodic Alumina via Stepwise Anodization with Voltage Modulation and Pore Widening”, Nanomaterials 13 (2), 342 (2023). https://doi.org/10.3390/nano13020342

  14. Y. Park and C. Jeong*, “Fabrication of Functional Aluminum Surface through Anodization Mode Transition”, Journal of the Korean Institute of Surfaces Engineering 55 (6), 417- 424 (2022).

  15. S. Lee and C. Jeong*, “Effect of Heat Treatment on Surface Properties of Aluminum 6061 Alloy after Anodization”, Corrosion Science and Technology 21 (6), 495-502 (2022). 

  16. S. Park and C. Jeong*, “Surface Electrical Conductivity and Growth Behavior of Aluminum 3003 Oxide Film”, Corrosion Science and Technology 21 (6), 487-494 (2022). 

  17. R. Kim and C. Jeong*, “Anti-Icing Characteristics of Aluminum 6061 Alloys according to Surface Nanostructure”, Corrosion Science and Technology 21 (6), 476-486 (2022). 

  18. J. Kim and C. Jeong*, “A Study on the Surface Properties and Corrosion Behavior of Functional Aluminum 3003 Alloy using Anodization Method”, Corrosion Science and Technology 21 (4), 290-299 (2022). 

  19. Y. Choi and C. Jeong*, “Growth Behavior and Corrosion Damage of Oxide Film According to Anodizing Time of Aluminum 1050 Alloy”, Corrosion Science and Technology 21 (4), 282-289 (2022).

  20. Y. Park and C. Jeong*, “Comparison of Hydrophobicity and Corrosion Properties of Aluminum 5052 and 6061 Alloys After Anodized Surface Treatment”, Corrosion Science and Technology 21 (3), 200-208 (2022). 

  21. C. Jeong*, “A Study on Functional Hydrophobic Stainless Steel 316L using Single-Step Anodization and a Self-Assembled Monolayer Coating to Improve Corrosion Resistance”, Coatings 12 (3), 395 (2022). https://doi.org/10.3390/coatings12030395

  22. Y. Park and C. Jeong*, “Surface Modification of Functional Titanium Oxide to Improve Corrosion Resistance”, Corrosion Science and Technology 20 (5), 256-265 (2021). 

  23. Y. Park and C. Jeong*, “Correlation of Surface Oxide Film Growth with Corrosion Resistance of Stainless Steel”, Corrosion Science and Technology 20 (3), 152-157 (2021).

  24. Y. Park and C. Jeong*,“Study on a Superhydrophobic Stainless Steel (SUS 304) Surface to Enhance Corrosion Resistance”, Korean Journal of Metals and Materials 59 (4), 217-222 (2021). https://dx.doi.org/10.3365/KJMM.2021.59.4.217

  25. S.-H. Kim and C. Jeong*, “Feasibility of Machine Learning Algorithms for Predicting the Deformation of Anodic Titanium Films by Modulating Anodization Processes”, Materials 14 (5), 1089 (2021). https://doi.org/10.3390/ma14051089

  26. Y. Park and C. Jeong*,“The Formation of Anodic Oxide Film by Anodizing Voltage and Time of 6061 Aluminum Alloy”, Journal of the Korean Institute of Electrical and Electronic Material Engineers 34 (1), 68-72 (2021). 

  27. K. Chen, S. Kim, G. Li, Z. Shi, C. Jeong, J. Kang, O. L. Li, “Enhancing ORR/OER Active Sites through Lattice Distortion of Fe-enriched FeNi3 Intermetallic Nanoparticles doped N-Doped Carbon for High Performance Rechargeable Zn-air Battery”, Journal of Colloid and Interface Science 582, 977-990 (2021). https://doi.org/10.1016/j.jcis.2020.08.101

  28. Z. U. Rehman, C. Jeong and D. Choi, “Effect of NaOH Concentration on the Microstructure and Mechanical Properties of the PEO Coatings on Mg-Al3-Zn Alloy”, Materials Science Forum 977, 83-89 (2020). 

  29. Y. Park, H. Ji and C. Jeong*, “Development of Superhydrophilic 6061 Aluminum Alloy by Stepwise Anodizing according to Pore-widening Time”, Korean Journal of Metals and Materials 58 (2), 97-102 (2020). http://dx.doi.org/10.3365/KJMM.2020.58.2.97

  30. H. Ji and C. Jeong*, “Fabrication of Superhydrophobic Aluminum Alloy Surface with Hierarchical Pore Nanostructure for Anti-corrosion, Corrosion Science and Technology 18 (6), 228-231 (2019). 

  31. C. Jeong* and H. Ji, “Systematic Control of Anodic Aluminum Oxide Nanostructures for Enhancing the Superhydrophobicity of 5052 Aluminum Alloy”, Materials 12 (19), 3231 (2019). https://doi.org/10.3390/ma12193231

  32. D. C. Ramachandran, S. P. Murugan, D.-Y. Kim, D.-C. Kim, C. Jeong, Y.-D. Park, “Effect of Microstructural Constituents on Fusion Zone Corrosion Properties of GMA Welded AA 5083 with Novel Al–Mg Welding Wires of High Mg Contents”, Metals and Materials International 25 (140), 1-13 (2019).  https://doi.org/10.1007/s12540-019-00434-9

  33. J. Joo, D. Kim, C. Jeong, J. Lee, “Effect of Hydrophobizing Method on Corrosion Resistance of Magnesium Alloy with Plasma Electrolytic Oxidation”, Journal of the Korean Institute of Surfaces Engineering 52 (2), 96-102 (2019).

  34. C. Jeong*, “Observation of Diverse Aluminum Oxide Structures in a Phosphoric Acid Solution according to the Applied Anodization Voltage Conditions”, Journal of Microelectronics and Packaging Society 26 (1), 35-39 (2019). 

  35. H. Jung, W. Kim, C. Jeong, J. Lee, “Wettability of Lubricant-Impregnated Electroplated Zinc Surface with Nanostructure”, Journal of the Korean Institute of Surfaces Engineering 52 (1), 37-42 (2019). 

  36. H. Ji and C. Jeong*, “Study on Corrosion and Oxide Growth Behavior of Anodized Aluminum 5052 Alloy”, Journal of the Korean Institute of Surfaces Engineering 51 (6), 372-380 (2018). 

  37. C. Jeong and C.-H. Choi, “Three-Dimensional (3D) Anodic Aluminum Surfaces by Modulating Electrochemical Method”, Journal of the Korean Institute of Surfaces Engineering 50 (6), 427-431 (2017). 

  38. V. Vijayan, N. Huda, S. P. Murugan, C. Jeong, S. M. Noh, N. Kang, Y.D. Park, “The weldability study of carbon nanotube-based 2nd generation primer-coated steel for automotive applications”, Journal of Mechanical Science and Technology 31 (9) 4405-4410 (2017). https://doi.org/10.1007/s12206-017-0840-7

  39. Md. R. U. Ahsan, M. Cheepu, T.-H. Kim, C. Jeong, Y. D. Park, “Mechanisms of weld pool flow and slag formation location in cold metal transfer (CMT) gas metal arc welding”, Welding in the World, 1-11 (2017). https://doi.org/10.1007/s40194-017-0489-y

  40. J. Lee, S. Shin, Y. Jiang, C. Jeong, H. A. Stone, and C.-H. Choi, “Oil-Impregnated Nanoporous Oxide Layer for Corrosion Protection with Self-Healing”, Advanced Functional Materials 27 (15), 1606040 (2017). https://doi.org/10.1002/adfm.201606040

  41. Md. R. U. Ahsan, Y. R. Kim, R. Ashiri, Y. J. Cho, C. Jeong and Y. D. Park, “Cold Metal Transfer (CMT) GMAW of Zinc-Coated Steel”, The Welding Journal 95 (4), 120-132 (2016).

  42. C. Jeong, J. Lee, K. Sheppard, and C.-H. Choi, “Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing Corrosion Resistance of Aluminum”, Langmuir 31 (40), 11040-11050 (2015). https://doi.org/10.1021/acs.langmuir.5b02392

  43. C. Jeong and C.-H. Choi, “Single-Step Direct Fabrication of Pillar-on-pore Hybrid Nanostructures in Anodizing Aluminum for Superior Superhydrophobic Efficiency”, ACS Applied Materials and Interfaces 4 (2), 842-848 (2012). https://doi.org/10.1021/am201514n

  44. S. Moon, C. Jeong, E. Byon, and Y. Jeong, “Electrochemical Behavior of Titanium in NaOH Solutions”, ECS Transactions 1, 151-156 (2006).  https://doi.org/10.1149/1.2215498

  45. E. Byon, S. Moon, S.-B. Cho, C.-Y. Jeong, Y. Jeong, Y.-T. Sul, “Electrochemical Property and Apatite Formation of Metal Ion Implanted Titanium for Medical Implants”, Surface and Coatings Technology 200, 1018-1021 (2005). https://doi.org/10.1016/j.surfcoat.2005.02.133

  Intellectual Property:

 

 - Patent 50 (Korea, USA, Canada, Japan)

 - Patent Application 100 (Korea, USA, Canada, Japan, PCT)

 - Technical Transfer Agreement 5

  Conferences

  1. Y. Choi and C. JeongResearch on the Morphology and Characterstics of Titanium Oxide Film by Modulating Pore-Widening Time after Anodization”, International Conference on Surface Engineering & Regional INTERFINISH 2023, Nov. 19-24, 2023, Busan Port International Exhibition & Convention Center (BPEX), Busan, Korea.

  2. J. Kim and C. JeongComparison of Actual Corrosion Behavior of Untreated SUS 316L and Anodized SUS 316L in 3.5 wt% NaCl Solution”, International Conference on Surface Engineering & Regional INTERFINISH 2023, Nov. 19-24, 2023, Busan Port International Exhibition & Convention Center (BPEX), Busan, Korea.

  3. Y. Choi and C. JeongStudy on the Characteristic of Titanium Nanostructure Changes depending on the Concentration of Pore-widening Solution”, The Corrosion Science Society of Korea Conference, Nov. 2-4, 2023, Boryeong-si, Korea. (Best Oral Presentation Award)

  4. J. Kim and C. JeongObservation of the Effect on Anodic Aluminum Oxide (AAO) and Pore Growth by Aluminum Alloy Type”, The Corrosion Science Society of Korea Conference, Nov. 2-4, 2023, Boryeong-si, Korea.

  5. S. Park and C. JeongComparison of Wettability According to the Roughness of Aluminum Nanostructures Formed by Anodization Voltage Variables”, The Corrosion Science Society of Korea Conference, Nov. 2-4, 2023, Boryeong-si, Korea.

  6. J. Kim and C. JeongEffect of Anodizing Time on Uniformity of Aluminum Nanostructure”, The Korean Institute of Surfaces Engineering Spring Meeting, May 17-19, 2023, Jeju, Korea.

  7. Y. Choi and C. JeongEffect of Time Variables in Anodizing Process Parameters on TiO2 Structure Shape”, The Korean Institute of Surfaces Engineering Spring Meeting, May 17-19, 2023, Jeju, Korea.

  8. 김경태, 이승용, 정찬영, 최승회, "전해환경에서 Cu 도금 용액 내 첨가제 분해에 대한 DFR의 영향", 한국표면공학회, 2023년 05월 17-19일, 제주, 대한민국. 

  9. 박태인, 이규환, 정찬영, 최승회, "도금액 활성화 처리를 통한 CuAg 도금층의 특성 향상", 한국표면공학회, 2023년 05월 17-19일, 제주, 대한민국. 

  10. S. Park and C. Jeong“A Study of Oxide Film Growth and Corrosion Characteristics according to the 1st Anodization Voltage of Aluminum 6061 Alloy”, The 2023 Corrosion Science Society of Korea Conference, May 11-12, 2023, Gyeongju-si, Korea.

  11. R. Kim and C. Jeong“A Study on the Shape and Characteristics of Titanium Oxide Film Implemented according to the Electrolyte”, The 2023 Corrosion Science Society of Korea Conference, May 11-12, 2023, Gyeongju-si, Korea.

  12. J. Kim and C. Jeong“A Study on Surface Treatment Conditions to Create a Uniform Anodic Aluminum Oxide (AAO)”, The 2022 Corrosion Science Society of Korea Conference, Nov. 24-25, 2022, Gyeongju-si, Korea. (Best Poster Presentation Award)

  13. Y. Choi and C. Jeong“A Study on the Hydrophobic Properties of Aluminum 5052 Alloy with the Variation of Liquid Viscosity”, The 2022 Corrosion Science Society of Korea Conference, Nov. 24-25, 2022, Gyeongju-si, Korea.

  14. R. Kim and C. Jeong“A Study on the Hydrophilic Properties of Nanostructures according to a Type of Electrolyte”, The 2022 Corrosion Science Society of Korea Conference, Nov. 24-25, 2022, Gyeongju-si, Korea. (Best Poster Presentation Award)

  15. S. Lee and C. Jeong“A Study on the Thermal Properties Aluminum 6061 Anodization after Heat Treatment”, The 2022 Corrosion Science Society of Korea Conference, Nov. 24-25, 2022, Gyeongju-si, Korea.

  16. S. Park and C. Jeong“A Study on the Corrosion Behavior of Aluminum 3003 Oxide Film Growth”, The 2022 Corrosion Science Society of Korea Conference, Nov. 24-25, 2022, Gyeongju-si, Korea.

  17. ​김경태, 김용균, 김성익, 정찬영, 최승회, "전해 환경에서 Cu 도금 용액 내 Cu+착물 생성 연구", 한국표면공학회, 2022년 11월 10일, 광주, 대한민국.

  18. 박태인, 공원효, 이규환, 정찬영, 최승회, "도금액 내  염소이온 제거를 통한 CuAg 도금층의 특성 향상", 한국표면공학회, 2022년 11월 10일, 광주, 대한민국. (Best Oral Presentation Award)

  19. 박영주, 김지수, 최예지, 정찬영, "나노 구조물 제어를 통한 알루미늄 1050 합금의 기능성 표면 연구", 한국표면공학회, 2022년 11월 10일, 광주, 대한민국.

  20. Y. Choi, J. Kim, Y. Park and C. Jeong“Comparison of Corrosion Resistance to Oxide Film by Aluminum  5000 Series and 6000 Series Alloys Produced by Anodizing Method”, The 2021 Corrosion Science Society of Korea Conference, Nov. 18-20, 2021, Yeo-su, Korea.

  21. M. Choi, T. Park, Y. Park and C. Jeong“Comparison of Corrosion Resistance of Anodized Stainless Steel 316L and 304”, The 2021 Corrosion Science Society of Korea Conference, Nov. 18-20, 2021, Yeo-su, Korea. (Best Poster Presentation Award)

  22. J. Kim, Y. Choi, M. Choi and C. Jeong“Comparison of Corrosion Resistance through Oxide Film Formation of Aluminum Alloy 1000 Series and 3000 Series”, The 2021 Corrosion Science Society of Korea Conference, Nov. 18-20, 2021, Yeo-su, Korea.

  23. H. Ji, Y. Park, T. Park and C. JeongEffect of Anodization Voltage on the Formation of Anodic Oxide on Ti-grade 4”, The Korean Institute of Surfaces Engineering Spring Meeting, June 24-26, 2020, Busan, Korea.

  24. Y. Park, H. Ji, T. Park and C. Jeong,“Formation of Titanium Oxide Film with Anodization by Modulating Anodization Time”, The Korean Institute of Surfaces Engineering Spring Meeting, June 24-26, 2020, Busan, Korea.

  25. Y. Park, H. Ji, and C. Jeong“Fabrication of 6061 Aluminum Alloy Surface by Modulating Anodization Condition”, The Korean Institute of Surfaces Engineering Fall Meeting, Nov. 14-15, 2019, Gyeongju-si, Korea.

  26. H. Ji and C. Jeong“Observation of TiO2 Growth according to Various Anodization Time Condition and Applied Voltage Changes”, The Korean Institute of Surfaces Engineering Fall Meeting, Nov. 14-15, 2019, Gyeongju-si, Korea.

  27. H. Ji and C. Jeong“Fabrication of Superhydrophobic Aluminum Alloy Surface with Hierarchical Pore Nanostructure for Anticorrosion”, The 2019 International Corrosion Engineering Conference (ICEC 2019), Oct. 13-17, 2019, Incheon, Korea.

  28. M. A. Karim, J.-H. Bae, D.-H. Kam, C. Kim, C. Jeong, and Y.-D. Park, “Effect of Corrosion Behavior of Rivet Coating on Mechanical Performance Degradation of Self-piercing Riveted Joints”, The 2019 International Corrosion Engineering Conference (ICEC 2019), Oct. 13-17, 2019, Incheon, Korea.

  29. D. Choi, Z. U. Rehman, and C. Jeong, “Optimization of PEO Ceramic Coating on Ti-6Al-4V Alloy for Biomedical Implants”, The International Conference on Metal Materials Processes and Manufacturing (ICMMPM 2019), July 30-31, Jeju Island, Korea.

  30. Z. U. Rehman, C. Jeong, and D. Choi, Improving the Corrosion and Wear Resistance of AZ Series Mg Alloys using Plasma Electrolytic Oxidation Coating Techniques”, The International Conference on Metal Materials Processes and Manufacturing (ICMMPM 2019), July 30-31, 2019, Jeju Island, Korea.

  31. H. Ji and C. Jeong“Corrosion Resistance of Superhydrophobic Aluminum 5052 Alloy Surface using Anodizing with Pore-widening Time”, The International Conference on Nature Inspired Surface Engineering (NISE 2019), June 11-14, 2019, New Jersey, US.

  32. Z. U. Rehman, C. Jeong, and D. Choi, “Metal Nitrate Complexes as Post PEO Conversion Coating Agents for Corrosion Protection of Al-Mg Alloy”, The Korean Institute of Surfaces Engineering Spring Meeting, May 29, 2019, Seoul, Korea.

  33. C. Jeong“A Study on the Superhydrophobic Surface of Hybrid Alumina Nano-structures using Anodization Method”The Korean Institute of Surfaces Engineering Spring Meeting, May 29, 2019, Seoul, Korea.

  34. H. Ji, Y. Park, and C. Jeong, “A Study on the Hydrophilic Aluminum Alloy using Multistep Anodizing with the Applied Voltage ConditionThe Korean Institute of Surfaces Engineering Spring Meeting, May 29, 2019, Seoul, Korea.

  35. Y. Park, H. Ji, and C. JeongFabrication of Hybrid Alumina Structures on Aluminum Alloy using Stepwise Anodizing according to Pore-widening TimeThe Korean Institute of Surfaces Engineering Spring Meeting, May 29, 2019, Seoul, Korea.

  36. H. Ji and C. Jeong, A Study on the Corrosion Resistance of Superhydrophobic Aluminum Alloy using Stepwise AnodizingThe Korean Institute of Surfaces Engineering Spring Meeting, May 28-30, 2019, Seoul, Korea.

  37. H. Ji and C. Jeong, Superhydrophobic Aluminum Alloy Surface by Stepwise Anodization Technique", The CSSK 2019 Annual Spring Meeting and Corrosion Technology Seminar Program, April 24-25, 2019, Changwon, Korea.

  38. H. Ji and C. Jeong, “Observation of Corrosion Behavior with Aluminum 5052 Alloy by Modulating Anodizing Condition”,  The Korean Institute of Surfaces Engineering Fall Meeting, Nov. 15-16, 2018, Gyeongju-si, Korea.

  39. H. Ji, D. Choi, and C. Jeong, “Development of Superhydrophobic Aluminum Alloy (5052) by Stepwise Anodization Technique”, The Korean Institute of Surfaces Engineering Fall Meeting, Nov. 15-16, 2018, Gyeongju-si, Korea.

  40. D. C. Ramachandran, S. P. Murugan, J. Bae, D. Kim, D.C. Kim, C. Jeong, and Y.-D. Park, “Effect of Mg Content on the Fusion Zone Corrosion Properties of Gas Metal Arc Welded Al Mg 5083 Alloy”, The CSSK 2018 Annual Autumn Meeting and Power Plant Symposium, Oct. 24~25, 2018, Daejeon, Korea.

  41. Md. A. Karim, J. Bae, C. Jeong, D. Kam, N. Jeon, C. Kim, and Y.-D. Park, “Effect of Rivet Coating Types on Joint Integrity and Corrosion Behavior for CFRP to Aluminum Self-Piercing Rivet Joints”, The CSSK 2018 Annual Autumn Meeting and Power Plant Symposium, Oct. 24~25, 2018, Daejeon, Korea.

  42. J. Bae, Y.-D. Park, MA. Karim, DH. Kam, C. Kim, and C. Jeong, “A Comparative Study on the Corrosion Properties of Self-Piercing Riveted CFRP/Steel and CFRP/Aluminum Joints”, in Proceedings of AiMES 2018: The Electrochemistry Society 234th (ECS) Meeting, Oct. 2, 2018, Cancun, Mexico.

  43. H. Ji, D. Choi, and C. Jeong, “Observation of corrosion behavior with aluminum 5052 alloy by modulating anodization time”, The Korean Institute of Surfaces Engineering Spring Meeting, June 15, 2018, Ansan, Korea

  44. J.-H. Bae, Y.-D. Park, J. Yang, D. Kim, M.A. Karim, D.-H. Kam, C. Kim, and C. Jeong, “Assessment of the Corrosion Properties of Dissimilar Self-Piercing Rivet with CFRP/Metal Joints”, The CSSK 2018 Annual Meeting and 3D Metal Printing Technology Standard Symposium and Future Automotive Corrosion Forum Program, May 11, 2018, Andong, Korea

  45. D. C. Ramachandran, J.-H. Bae, J. U. Lee, T. Y. Kang, S. P. Murugan, D.-Y. Kim, D.-C. Kim, C. Jeong, and Y.-D. Park, “Effect of Mg on Corrosion Properties of Gas Metal Arc Welded Al-Mg 5083 Alloy”, The Korea Welding and Joining Society Meeting, Apr. 21, 2018, Gwangju, Korea.

  46. J.-H. Bae, Y.-D. Park, D.-H. Kam, C. Kim, and C. Jeong, “A Study on the Corrosion Properties of a Dissimilar Self-Piercing Rivet with CFRP-Steel joints”, The Korea Welding and Joining Society Meeting, Nov. 30, 2017,  Daegu, Korea. (Best Oral Presentation Award)

  47. S.P. Murugan, J.-D. Kim, D. C. Ramachandran, J.S. Kim, J.-U. Kim, C. Jeong, and Y.-D. Park, “The formation and coarsening of TiN precipitates in the high strength low alloy steel heat affected zone”, The Korea Welding and Joining Society Meeting, Nov. 30, 2017,  Daegu, Korea.

  48. J.-U. Kim, T.-Y. Kang, S. P. Murugan, J.-D. Kim, C. Jeong, D.-G. Nam, and Y.-D. Park, “On the typical defect formation of FSWed  UFG CP-Ti sheets”, The Korea Welding and Joining Society Meeting, Nov. 30, 2017,  Daegu, Korea.

  49. D. C. Ramachandran, J. Kim, S. Lee, J. Kim, JS. Kim, S. P. Murugan, C. Jeong, and Y.-D. Park, “The formation and coarsening of TiN precipitates in the high strength low alloy steel heat affected zone”, The Korea Welding and Joining Society Meeting, Nov. 30, 2017,  Daegu, Korea.

  50. C. Jeong, W. Xu, K. Du, and C.-H. Choi, “Corrosion Resistance of Nanoporous Superhydrophobic Surfaces of Anodic Aluminum Oxide”, in Proceedings of PRiME 2012: 222nd ECS Meeting, Oct. 7–12, 2012, Honolulu, HI, USA.

  51. C. Jeong and C.-H. Choi, “Stepwise Anodizing Processes for Hierarchical Nanoporous Structures”, in Proceedings of PRiME 2012: 222nd ECS Meeting, Oct. 7–12, 2012, Honolulu, HI, USA.

  52. C. Jeong and C.-H. Choi, “Anodizing of Pillar-on-Pore Hybrid Nanostructures for Superhydrophobic Surfaces of Aluminum”, in Proceedings of UKC 2012: The 2012 US-Korea Conference on Science, Technology, & Entrepreneurship, Aug. 8–11, 2012, Los Angeles, CA, USA. (Invited Talk)

  53. C. Jeong, S. Moon, and Y. Jeong, “Electrochemical Behavior of Titanium in 1M NaOH solution”, The 3rd International Symposium on APST, Nov. 5, 2004, Busan, South Korea.

 

  Invited Talks

  1. LG Electronics, “Aluminum Surface Treatment Technology for the Removal of Portable Hood Filter Oil Vapor”, November 18, 2022, Seoul, Korea.

  2. Korea Institute of Industrial Technology, “Research with Functional Metal Surface Treatment for Anti-Fouling and Anti-Corrosion”, November 03, 2021, Ulsan-si, Korea. 

  3. LG Electronics, “Research with Functional Metal Surface Treatment for Anti-Fouling and Anti-Corrosion”, June 16, 2021, Seoul, Korea. 

  4. KG Dongbu Steel, "Research with Functional Metal Surface Treatment for Anti-Corrosion”, December 18, 2020, Incheon-si, Korea.

  5. Hongik University, “Multi-functional Metal Surfaces for Smart City”, November 4, 2019, Daejeon-si, Korea.

  6. Dongyang AK Ltd., “Functional Aluminum Surface for Roof Top Application”, April 24, 2019, Sejong-si, Korea.

  7. Hongik University, “The Research Progress of Metal Surface Modification for Automotive”, June 15, 2018, Sejong-si, Korea.

  8. Korea Institute of Science & Technology Evaluation & Planning, “Functional Modification of Aluminum Alloy  Surfaces for Anti-Corrosion”, April 10, 2018, Seoul, Korea.

  9. Korea Institute of Materials Science, “Superhydrophobic aluminum surface for naval applications”, November 17, 2017,  Changwon-si, Korea

  10. Dong-eui University, “Nano-Engineering of Superhydrophobic Aluminum Surface for Anti-Corrosion”, December 8, 2016,  Busan, Korea.

  11. Mokpo Maritime University, “Hydrophobic Nanofabrication Technology and Offshore Plant Materials”, December 28, 2015,  Mokpo-si, Korea.

  12. Changwon National University, “Surface Engineered with Aluminum Alloys: Superhydrophobic for Anti-Corrosion and Slippery Surface for Anti-icing”, August 5, 2015, Changwon-si, Korea.

  13. Korea Institute of Energy Research, “Nano-Engineered Superhydrophobic Aluminum Surfaces for Anti-Corrosion, May 7, 2015,  Daejeon-si, Korea.

  14. LG Electronics, “Enhancing Energy Efficiency with Nanoengineered Superhydrophobic Aluminum Surfaces”, April 26, 2014, San Francisco, CA, USA.

  15. Alcoa Technical Center, “Nano-Engineered Superhydrophobic Aluminum Surfaces for Anti-Corrosion”, June 11, 2013, Pittsburgh, PA, USA.

  16. Korea Institute of Material Science, “Electrochemical Behaviors of Hydrophobic Aluminum Anodized Surfaces”, Jan. 9, 2013,  Changwon-si, Korea.

  17. Pusan National University, “Enhancing Corrosion resistance with Superhydorphobic Aluminum Surfaces”, Jan. 8, 2013,  Busan, Korea.

  18. Korea Maritime University, “Nano-engineered Superhydrophobic alumina nanostructure for Corrosion resistance”, Jan. 7, 2013,  Busan, Korea.

  19. Dong-eui University, “Nano-engineered Superhydorphobic Aluminum Surfaces for Anti-corrosion”, Jan. 4, 2013,  Busan, Korea.

  20. Samsung Electronics, “Nano-engineered Superhydrophobic Surfaces for Anti-corrosion”, Aug. 6, 2012, New Jersey, NJ, USA.

  21. Hyundai Motors, 1st Global Top Talent Forum, “Nano-engineered Superhydrophobic Aluminum Surfaces for Motor Vehicle”, Nov. 4–5, 2011, San Diego, CA, USA.

bottom of page